Pastel Purple PLA Filament (1.75mm, 1kg)

3DQF PLA is made in Greater Manchester right here in the UK, with tight tolerances, the highest quality material and a fully recyclable custom cardboard spool. We’re big fans of 3DQF filament and it’s great to support a fellow small UK business in the maker scene.

This is 3DQF Pastel Purple 1.75mm PLA in a generous 1kg spool. Pastel Purple is a brilliantly smooth, soft purple with calm feels. We’re getting strong parma violets vibes off this one! We also have many other colours available in the store!

The custom laser-cut cardboard is fully recyclable and includes a filament indicator to help you keep an eye on your remaining PLA. You can also 3D print a roller-style edge protection rim or axle-style low-friction spool rings for your spool holder.

3DQF PLA holds a tight tolerance of 0.06mm – and that’s over a 21-kilometre run (a human hair is .04!)! This 3D Printing filament enjoys higher temperatures than others on the market (200-225°C), so we suggest starting at 210°C and adjusting to suit your printer/results.

All the Colours!

Not the purple you were looking for? We’ve got lots of other purple options in the store:

• Electric Purple – Like electric, but more…purpley?
• Pearl Plum – Perfectly pinky-purple plumness for your PLA printing past-time!
• Regal Purple – Mature with a gold twist – posh!

Other options in the pastel range:

• Pastel Pink
• Pastel Blue
• Pastel Green

Printable Spool Adaptors

As the spool is cardboard, you may want to print an adapter for your setup (please note that future batches of this filament may include a printed spool inner already within the reel):

• Bambu Labs AMS users – Print this spool adaptor for the best performance (we also found that squishing a big ball of blu-tack inside the adapter can help keep the AMS happy as the extra weight helps to keep the spool in place)
• Bambu AMS Lite users – Print these low-friction spool rings
• Using a roller-type spool holder? Print one of these spool edge protectors (Not AMS-friendly, use the AMS version above)
• Using a traditional spool holder? Print these low-friction inserts for smooth, stable unloading

Recommended Printing Parameters

• Hot end Temperature: 210-220°C (start at 210°C and adjust up/down for your printer/scenario)
• Bed Temperature: 40-50°C or unheated (start at 50°C and adjust for your printer/scenario)
• First Layer Speed: 30 mmps or lower (we use 12.5mmps!)
• Print Speed: 50-80mmps (we stick below 50mmps)
• Retraction: 2-4mm
• Fan: 100% from the start
• Filament cleaner: Recommended
• Like all PLA, keep it dry and away from humidity as much as possible

…and always check your levels…then check em’ again!

Resources

• Easy Start Guide
• High-Speed Printing Guide
• Datasheet

Specification

• Colour: Pastel Purple
• Material PLA filament
• Diameter 1.75mm + tolerance
• Tolerance 0.06mm
• Filament Weight 1kg Gross
• Open/closed enclosure
• Net filament 1KG + Spool

Spool Specification

• 76mm W
• 195mm D
• 70 mm Axle
• Card construction
• Fully recyclable
• Delivered in a sealed airtight bag with desiccant

Package Contents

• 1x 1kg spool of 1.75mm PLA (Pastel Purple)

Made in the UK

This PLA filament, spool, outer box and even the box printing are all made in the UK.